歡迎訪問濟南金昊化工有限公司網站!
全國咨詢熱線:13869119097

聯系我們

濟南金昊化工有限公司

電話:13869119097

傳真:0531-88529097

售后:0531-88529097

地址:濟南市天橋區桑梓店鎮化工市場南區

新聞中心

所在位置:首頁 > 新聞中心 

氫氧化鉀的包裝方式有哪些?

發布來源:http://www.gzx01.com    更新時間:2020-07-21 點擊數:200

氫氧化鉀根據各行各業的需求不同,會分為固體、溶液以及粉末等幾種不同的形態,那么,為了方便運輸和儲存我們會選擇對進行包裝。那么它的包裝也是有很多方式的,下面小編就具體來給大家介紹一下產品的包裝方式有哪些。

According to the different needs of all walks of life, potassium hydroxide can be divided into several different forms, such as solid, solution and powder. In order to facilitate transportation and storage, we will choose to pack. So its packaging is also in many ways, the following small series to give you a specific introduction to the product packaging way what.
1、固體塊狀氫氧化鉀采用GB/T325.2-2010中的直開口鋼桶包裝,其規格尺寸符合GB/T325.2-2010中規定,鋼桶厚度符合GB/T325.2-2010中輕型桶的規定。每桶凈含量為50kg、100kg、150kg和200kg。
1. Solid block potassium hydroxide shall be packed in straight open steel drum specified in GB / t325.2-2010, and its specification and size shall meet the provisions of GB / t325.2-2010, and the thickness of steel drum shall comply with the provisions of light drum in GB / t325.2-2010. The net content of each barrel is 50kg, 100kg, 150kg and 200kg.
2、固體片狀產品采用兩層包裝。內包裝采用聚乙烯塑料薄膜袋,外包裝采用聚丙烯涂膜編織袋。每袋凈含量25kg、40kg、50kg。也可采用噸包裝,集裝箱的尺寸和每袋凈含量可根據用戶的要求進行協商。包裝時,內層用尼龍繩或其他質量相當?shù)睦K扎口,外層編織袋用縫包機縫口,縫口牢固,不得有跳線漏線現象。
氫氧化鉀
2. Solid sheet products are packed in two layers. The inner package is made of polyethylene plastic film bag, and the outer package is made of polypropylene film woven bag. The net content of each bag is 25kg, 40kg and 50kg. The size of container and net content of each bag can be negotiated according to the requirements of users. When packing, the inner layer should be tied with nylon rope or other ropes of equivalent quality, and the outer woven bag should be sewn by sewing machine. The seam should be firm and there should be no jumper leakage.
3、固體片狀的氫氧化鉀也可采用雙層包裝。內包裝采用聚乙烯塑料薄膜袋,厚度不小于0.1mm;外包裝采用GB/T?325.2-2010中的全開口鋼桶中的直開口鋼桶包裝,其規格尺寸符合GB/T325.2-2010中的規定,鋼桶厚度符合GB/T325.2-2010中輕型桶的規定。每桶凈含量為50kg或100kg。包裝時,內袋用維尼龍繩或其他質量相當?shù)睦K扎口,將鐵桶與桶蓋用桶圈固定,保證桶蓋不松動,整體牢固。
3. Solid flake potassium hydroxide can also be packed in double layers. Polyethylene plastic film bag with thickness not less than 0.1 mm shall be used for inner packaging; straight open steel drum from full opening steel drum specified in GB / T? 325.2-2010 shall be used for outer packaging, and its specification and size shall meet the provisions of GB / t325.2-2010, and the thickness of steel drum shall comply with the provisions of light drum in GB / t325.2-2010. The net content of each barrel is 50kg or 100kg. When packing, the inner bag should be tied with vinylon rope or other ropes of equivalent quality, and the iron barrel and the cover should be fixed with the barrel ring to ensure that the lid is not loose and the whole is firm.
4、溶液采用專用鐵路槽車或公路槽車及鐵桶裝運。槽車上口用鐵蓋蓋嚴、卡牢。
4. The solution is transported by special railway tank car or highway tank car and iron drum. The upper port of the tank car is tightly covered and clamped with iron cover.
5、也可采用噸包裝,集裝箱的尺寸和每袋凈含量可根據用戶的要求進行協商。
5. The size of container and net content of each bag can be negotiated according to the requirements of users.
以上就是關于氫氧化鉀的包裝方式的介紹,據上文了解我們通常會根據產品的重量以及形態來覺得其包裝的方式,當然也可以根據顧客的要求進行協商。以上幾種屬于常規的包裝方法,大家在選擇的時候要根據實際情況來選擇合適的包裝方式。
The above is about the packaging method of potassium hydroxide. According to the above understanding, we usually think of the packaging method according to the weight and shape of the product, of course, we can also negotiate according to the requirements of customers. The above several belong to the conventional packaging method, we should choose the appropriate packaging method according to the actual situation.

聯系我們

濟南金昊化工有限公司

電話:13869119097

傳真:0531-88529097

售后:0531-88529097

地址:濟南市天橋區桑梓店鎮化工市場南區

掃描二維碼,關注我們

13869119097

全國客戶服務熱線

濟南金昊化工有限公司

備案號:魯ICP備19046505號-2